Thermometer
Essential for measuring body temperature, available in various types (oral, rectal, forehead) to suit different needs.
HOW TO USE IT
1.Connect to Device
– Enable bluetooth on your mobile device.
– Open callcare24 and go to my health tab.
-Click on Body temperature tile.
Note: For First time connectivity need to pair the device Turn on the Thermometer device and pair the device by entering the pin which is present on backside of device
2.Measure Vitals
– Turn on the thermometer & Take the temperature readings
3.Sync Readings
-Temperature readings will show on the tile. – Click on save to sync the readings into callcare 24 App.
FAQ's
A thermometer is a device used to measure temperature.
There are several types of thermometers, including glass thermometers, digital thermometers, infrared thermometers, and ear thermometers.
Thermometers are commonly used to measure body temperature when someone is feeling unwell or to monitor temperature in various environments.
The normal human body temperature is typically around 98.6°F (37°C).
Digital thermometers are generally accurate, but their precision can vary depending on the model and proper usage.
Yes, some thermometers, such as infrared thermometers, can be used to measure the temperature of objects.
Please refer to the manufacturer’s instructions for specific cleaning and sanitization guidelines.
If you encounter any issues with your thermometer, please contact the manufacturer’s customer support for assistance.
Troubleshooting
1. Device battery problem.
2. Internet connectivity.
1. Check the battery status of Vital 360 device.
2. Make sure to charge the device if the battery is low.
3. Switch off the device and Turn it on again.
4. Check the internet is properly connected through Wi-Fi / Cellular network.
5. Change the network mode and try to save the readings.
6. Retake the vitals from device and verify that they are displaying correctly.
1. Improper Cuff placement to hand.
2. Improper Selection of positions in vital 360 & not maintaining same positions while measuring BP
1. Check the cuff is placed correctly to selected hand.
2. Keep the cuff properly to hand.
3. Check the device is placed correctly while measuring the BP
4. Verify the vital data after measuring and try to retake the readings if the data is not accurate.
1. Improper placement of IR sensor to body
2. Improper accuracy because of dust or dirt in IR sensor
1. Check the device is connected to proper internet
2. Make sure you’re holding the Vital 360 at the correct distance
3. Clean the infrared sensor with a soft cloth, as dust or dirt can impact accuracy.
4. Allow a few seconds between measurements to reset the sensor.
5. Wait or hold the device until the timer completes
Contact Us
USA
- 831 N Tatnall St., STE M #134 Wilmington, DE – 19801
- +1 614 615 1507
- info@callcare24.com
- 4200 Research Forest Dr, The Woodlands, TX - 77381
- sales@callcare24.com
INDIA
- Suite 303, 3rd Floor, Trade Fair Office Building, Hitex Exhibition Center, Hyderabad, Telangana - 500084
- +91 62 62 95 72 72
- info@callcare24.com
- sales@callcare24.com
SAUDI ARABIA
- 7730, King Saud Al Sulimaniyah District, Mazya Tower 3, 12621 Riyadh, KSA.
- +966 11 505 1894
- info@callcare24.com
- sales@callcare24.com
