Blood Pressure Monitor (BPM)
HOW TO USE IT
1.Connect to Device
Enable bluetooth in your mobile device.
– Open callcare24 and go to my health tab.
-Click on BP/Pulse tile.
Note: For First time connectivity need to pair the device Turn on the omron device and pair the device by entering the pin which is present on backside of device
2.Measure Vitals
– Take the BP readings.
3.Sync Readings
-Click on save to sync the latest readings into callcare 24 app.
– Click on retake to take a different BP/pulse readings.
FAQ's
a. BPM Machine b. Batteries
Yes, Smartphone device equipped with Bluetooth is necessary
Yes, This BPM is compatible with both Android and iOS.
Yes, Its compatible
Go to App store or google play store Search for callcare24
Once the app is downloaded in your smartphone, No need Wi-Fi or cellular data. BPM connects to your mobile device through Bluetooth.
Yes, but ensure the device is paired with mobile phone.
Troubleshooting
1. Device battery problem.
2. Internet connectivity.
1. Check the battery status of Vital 360 device.
2. Make sure to charge the device if the battery is low.
3. Switch off the device and Turn it on again.
4. Check the internet is properly connected through Wi-Fi / Cellular network.
5. Change the network mode and try to save the readings.
6. Retake the vitals from device and verify that they are displaying correctly.
1. Improper Cuff placement to hand.
2. Improper Selection of positions in vital 360 & not maintaining same positions while measuring BP
1. Check the cuff is placed correctly to selected hand.
2. Keep the cuff properly to hand.
3. Check the device is placed correctly while measuring the BP
4. Verify the vital data after measuring and try to retake the readings if the data is not accurate.
1. Improper placement of IR sensor to body
2. Improper accuracy because of dust or dirt in IR sensor
1. Check the device is connected to proper internet
2. Make sure you’re holding the Vital 360 at the correct distance
3. Clean the infrared sensor with a soft cloth, as dust or dirt can impact accuracy.
4. Allow a few seconds between measurements to reset the sensor.
5. Wait or hold the device until the timer completes
Contact Us
USA
- 831 N Tatnall St., STE M #134 Wilmington, DE – 19801
- +1 614 615 1507
- info@callcare24.com
- 4200 Research Forest Dr, The Woodlands, TX - 77381
- sales@callcare24.com
INDIA
- Suite 303, 3rd Floor, Trade Fair Office Building, Hitex Exhibition Center, Hyderabad, Telangana - 500084
- +91 62 62 95 72 72
- info@callcare24.com
- sales@callcare24.com
SAUDI ARABIA
- 7730, King Saud Al Sulimaniyah District, Mazya Tower 3, 12621 Riyadh, KSA.
- +966 11 505 1894
- info@callcare24.com
- sales@callcare24.com
